PREFABRICATED ASSORTED
DRAINAGE COMPOSITES

These drainage composites perform multi-faceted roles by providing protection for waterproofing systems and collecting excess water in planters, roof top gardens, horizontal surfaces, golf courses, municipal parks, athletic fields, building foundations, basement foundations, bridge abutments & under slabs.

A variety of different size fittings are available to make your installation quick and easy. Advantages in the Modular Foundation Drainage include:

• Continuous fabric over-wrap allows water to enter along the entire cross- section of drain. 

• Drainage core allows for a high volume of water and unobstructed flow.

• Easy to use fittings simplify installation.

• Simple installation by unrolling the lightweight, flexible rolls, cut and position.

• Rot-proof and resistant materials to all known naturally occurring earth minerals and salts.

• No expensive product or labor for gravel or aggregate.

Modular Foundation Drainage

This is a modular composite drainage and collection system consisting of a 3-dimensional, high flow, drainage core which is wrapped with a non-woven filter fabric.  The modular composite drainage & collection system is designed to replace a conventional sand or gravel covered pipe drain, such as around retaining walls and building foundations. The soil particles are held back by the non-woven filter fabric allowing just the water to pass through to the drain core for easy removal by sump or by running to daylight.  

	End Outlet is used to make transition from drain to a corrugated 4" plastic pipe for moving the collected water to sump or daylight.
	Side Outlet is used to make an in line transition from drain for intermediate collection of water along footing.
	Corner Outlet is used to make corner transition from drain at an outside corner to a 4" corrugated pipe to sump or daylight.
	End Cap is used to cover the cut end of drain at either vertical or horizontal terminations.
	Splice is used to connect two strips drain either vertically or horizontally.
	Corner is used to connect two strips of drain on an inside or outside corner

Site Water Drainage Composite Systems

These are a composite turf drainage system consisting of a 3-dimensional, high flow, drainage
core and a non-woven, needle-punched filter fabric. The filter fabric is wrapped and bonded to
the drainage core, preventing intrusion of the filter fabric into the flow channels during the
backfilling process.  Soil particles are held back by the filter fabric and water passes through
to the drain. 

Available in 6 inch, 12 inch, 18 inch and 24 inch widths.

Applications Include

• Golf course greens, tees, fairways and bunkers.

• Landscape around buildings and home sites
• Synthetic turf athletic fields
• Natural turf athletic fields
• Sidewalk edge drains
• Highway edge drain
• Many others

Prefabricated Drainage Composites

Consists of an impermeable polymeric sheet cuspated under heat and pressure to form a high flow dimpled drainage core.  The core is bonded to a layer of filter fabric (available with a woven or non-woven filter fabric). The filter fabric retains soil or sand particles as well as freshly placed concrete or grout, allowing filtered water to pass into the drainage core.

Geonet:
#160, #200, #250
Geonets are extruded three-dimensional HDPE drainage cores 

providing high flow for planar drainage of liquids or gases.
Geonets serve as a suitable replacement for conventional aggregate systems.

Applications: 

• Leachate Collection
• Leachate Detection
• Gas Vents
• Covers
• Caps

Advantages

• Lightweight, flexible rolls need only to be unrolled, cut and positioned, resulting in
  considerable savings in time.

• Materials are resistant to all known naturally occurring earth minerals and salts.

• Exceeds required standards from transmissivity even at high compressive strengths.

• Available in three thickness' ranging from 0.16" to 0.25" which will accommodate a
  wide variety of field applications.

• Manufactured from chemically resistant polyethylene.

• Special or heavy equipment is not required for installation

GEONET DRAINAGE COMPOSITES

An extruded high-density polyethylene drainage core with a non-woven filter fabric
bonded to the ridges of the geonet.  The filter fabric retains soil or sand particles as
well as freshly placed concrete or grout, allowing filtered water to pass into the drainage core.
The HDPE core is literally crush-proof, yet flexible enough to conform to irregular surfaces.
Because of this crush-proof nature, geonet drainage composites can be used in the most
extreme cases with heavy loads and/or heavy vehicular traffic, both horizontally and vertically.

Please call for more information concerning
the drainage composites, including technical data, specs, etc.

Late updated 12/28/2007