Galvanizing

Custom made drop-in liners for your plating, galvanizing and anodizing dip tanks and vats. Rope and grommets are fabricated into the liner for easy installation that will keep your liner in place in the tank. Stainless steel clips can also be used to keep your liner in place inside the vessel.

Custom Copolymer Polypropylene rigid liners and stand alone tanks are also available for longer lasting containment.

Floor lining is also a way to keep harmful chemicals from spilling and then seeping into the concrete or other flooring material.

Most liners are designed for easy self-installation using rope and grommets
included in the liner or reasonably priced stainless steel clips. These are added to ensure its stable placement. Inlets, outlets, weirs, skirts and sumps are custom fabricated into the liner, keeping the liner in one solid piece.

Several different formulas of materials are used for the containment of your specific chemical and your operating temperatures.

Our experienced staff will recommend and quote materials that will best suit
your needs, with a quick turnout time so your liner arrives as quickly as possible, especially in those emergency situations.
color bar

These are the most common and most used materials in the plating, metal finishing, galvanizing and anodizing industries.

PVC materials are the most widely used in the plating, galvanizing and anodizing industries for the containment of most chemicals used today in these industries. From standard materials to high-temp materials, in thicknesses' ranging from 20 mil through 3/16".

Standard Gray PVC

20 mil	40 mil
30 mil	60 mil
3/32" mil	1/8" mil
3/16" mil

Standard PVC's are used in mild rinse tanks and in solutions up to 140 degrees.

Thinner mil thickness materials are used in tanks with less chance of falling objects puncturing the liners, and the thicker mil materials are used when there is a greater chance of falling objects or continuous rubbing of the liner causing mechanical failure. Standard PVC is also an excellent floor liner.

Oil Resistant PVC

40 mil	3/32"
60 mil	1/8"
3/16" mil

Oil Resistant PVC is a great lining system where oil spills are possible in floor linings, and also tank linings, berms, secondary containment, Oil Field applications.

This material is also excellent in applications where the liners is exposed to UV rays. Oil Resistant PVC is good to 175 degrees.

High-Temp PVC

60 mil	1/8"
3/32"	3/16"

High-Temp PVC's are used when temps can exceed 150 degrees up to 200 degrees, or at constant temperatures not to exceed 200 degrees. This is an excellent material for chrome.

The higher mil thickness materials are more puncture resistant than the lower mil materials.
These High-Temp materials are very popular for long lasting durable containment of plating, anodizing and galvanizing solutions.

HDPE

40 mil	80 mil
60 mil	100 mil

HDPE is great for lining floors and sump applications.

Due to installation procedures, Field Lining Systems generally installs these type of liners in the western United States.